Login / Signup
Sitewide Sale Ending Soon! | Contact Us For Exclusive Discounts! | Limited Stock ⏳
Supersize your parking capacity with this revolutionary 3 level parking lift from BendPak! This unique four-post BendPak lift design parks up to three vehicles in one space, instantly tripling your parking capacity. With an extended length and taller rise compared to the HD-973P, the HD-973PX has even more room for your longest and boxiest vehicles.
The HD-973PX is a four-post 3 level parking lift that maximizes your parking capacity without adding any additional real estate. Each HD-973PX houses up to three vehicles on strengthened parking platforms to give you the most space for your buck. With an additional 84” of overall height compared to the HD-973P parking lift, the HD-973PX supports some of the biggest vehicles around! This extra height, along with the additional 10” of runway length, gives you the perfect amount of space to fit longer and taller vehicles, while maintaining a height that will fit comfortably in most shops and garages. With the topmost platform’s weight capacity sitting at a hefty 7,000 lbs. and the lower deck handling up to 9,000 lbs., the HD-973PX is ideal for lifting even heavy-duty vehicles like full-size trucks and SUVs.
This rugged design is ready for installation indoors or outdoors, instantly tripling your parking and storing capability. The easy to use top-of-the-line design ensures that your vehicles are being lifted safely, and efficiently. Which saves you time, and worry. The safety features that come standard with any BendPak parking lift make sure your cars stay in the air until YOU move them, and intuitive design cycles through the cars at the push of a button. With the HD-973PX you’re getting a lift that can not only park your taller and longer vehicles, but fits comfortably and safely wherever you need it most.
Shortened height columns allow this car lift to fit in low ceiling spaces where others systems can’t. Although shorter in stature than most tri-level systems, the lower space still yields a full 70 inches of rise.
Typical multi-level car stackers include a bottom platform that is suspended from the upper platform via chains or cables—both platforms move simultaneously. This tethered operation results in limited spacing options between platforms, as the distance between platforms is fixed.
The HD-973PX 3 level parking lift features independently operated lifting platforms, permitting varied vehicle heights and spacing in either upper or lower parking spaces. Because the platforms do not have to move in unison with one another, you can now lower the bottom platform without disrupting the overhead vehicle being stored. This allows operators to control one platform at a time. Practically speaking, if you only want to swap out the second-level vehicle, you don't have to lower the top-level vehicle.
The patent-pending design of the HD-973PX BendPak parking lift features multi-position safety locks that are spaced just four inches apart. This allows almost unlimited parking height arrangements on either the upper or lower decks. Redundant, anti-fall, spring-loaded safety catches immediately halt downward movement of either platform in the unlikely event of cable failure.
A powerful hydraulic cylinder is enclosed underside each platform set and is matched with high-strength lifting cables for simplicity and dependability. The lift can be configured for drive-thru operation, allowing as many as three deep for maximum efficiency and better use of space.
High-rise parking lifts that can fit three vehicles will inevitably cost more than other lifts. There's simply more steel involved, and larger lifts require additional engineering, all of which gets incorporated in the cost. The HD-973PX BendPak parking lift offsets much of that extra cost because its smart design requires less steel. The end result is an incredibly efficient parking lift that actually saves buyers thousands of dollars while upholding the industry's most rigid safety standards.
Specially designed base frames distribute the load, which makes this unique lifting system suitable for installation on virtually any residential or commercial concrete floor. It can even be installed on asphalt when equipped with concrete footers. The HD-973PX may be configured as a stand-alone lift or combined into rows of multiple units.
| Model | HD-973PX |
| Style | Multi-Level Parking Lift |
| Lifting Capacity | 7,000 lbs. (3,175 kg) |
| Max Capacity / Front Axle | 3,500 lbs. (1,588 kg) |
| Max Capacity / Rear Axle | 3,500 lbs. (1,588 kg) |
| A - Overall Width | 110.5" (2,807 mm) |
| B - Overall Length | 252.25" (6,409 mm) |
| C - Height of Columns | 169.75" (4,312 mm) |
| D - Drive-thru Clearance | 86.5" (2,197 mm) |
| E - Maximum Rise | 151.5" (3,849 mm) |
| F - Maximum Lifting Height | 157" (3,988 mm) |
| G - Distance Between Columns | 100" (2,546 mm) |
| H - Runway Width | 19" (482 mm) |
| I - Width Between Runways | 35" (889 mm) or 41" (1,041 mm) |
| J - Runway Length | 208.5" (5,296 mm) |
| Min. Wheelbase @ rated Capacity | 140" (3,556 mm) |
| Min. Wheelbase @ 75% Capacity | 120" (3,084 mm) |
| Min. Wheelbase @ 50% Capacity | 100" (2,540 mm) |
| Min. Wheelbase @ 25% Capacity | 80" (2,032 mm) |
| Locking Positions | 34 |
| Locking Spacing | Every 4" (102 mm) |
| Lifting Time to Max. Rise | 90 seconds |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Lifting Capacity | 9,000 lbs. (4,082 kg) |
| Max Capacity / Front Axle | 4,500 lbs. (2,041 kg) |
| Max Capacity / Rear Axle | 4,500 lbs. (2,041 kg) |
| A - Overall Width | 110.5" (2,807 mm) |
| B - Overall Length | 252.25" (6,409 mm) |
| C - Height of Columns | 169.75" (4,312 mm) |
| D - Drive-thru Clearance | 86.5" (2,197 mm) |
| E - Maximum Rise | 82" (2,083 mm) |
| F - Maximum Lifting Height | 87" (2,210 mm) |
| G - Distance Between Columns | 100" (2,546 mm) |
| H - Runway Width | 19" (482 mm) |
| I - Width Between Runways | 35" (889 mm) or 41" (1,041 mm) |
| J - Runway Length | 208.5" (5,296 mm) |
| Min. Wheelbase @ rated Capacity | 135" (3,429 mm) |
| Min. Wheelbase @ 75% Capacity | 115" (2,921 mm) |
| Min. Wheelbase @ 50% Capacity | 95" (2,413 mm) |
| Min. Wheelbase @ 25% Capacity | 75" (1,905 mm) |
| Locking Positions | 16 |
| Locking Spacing | Every 4" (102 mm) |
| Lifting Time to Max. Rise | 50 seconds |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Shipping Weight | 5,948-lbs (2,697 kgs) |
Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions.
