BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4

Roll over image to zoom in

BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4

Name: BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4
Brand: BendPak
SKU: 5175292
Price: 60395.0 USD
Availability: InStock

BendPakSKU: 5175292

BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4

The Bendpak PCL-18B mobile column lift system comes in a set of 4. When combined, the system lifts up to 72,000 lbs. Ideal for two-axle vehicles. Sets of 2, 6 and 8 are also available.

Set of 4 Mobile Column Lifts

With a full set of mobile column lifts, you'll lift vehicles up to 72,000 lbs. This weight class encompasses most heavy-duty and commercial semi-trucks. If you need more lifting power, upgrade to a set of 6 or double your capability with a set of 8. For a frame-engaging adapter, check out the PCL-18B cross beam. This handy tool allows you to safely remove tires and perform full wheel service on your vehicle.

Product Features

18,000-lb. individual column capacity / 108,000-lb. maximum system capacity
Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger vehicles
208-240V, 3-phase main power system - optional voltages available upon request
SINGLE, PAIR or TEAM operation
For a standard four-column set, just three 30' cables are used leaving the front or back of the lift clear of cable obstructions
Simple operation, long service life and minimum maintenance
Intuitive controls allow the lift to be fully programmed and controlled from any column
Control systems feature 24-volt safety circuitry
The PLC and main system components are standard off-the-shelf brands rather than proprietary printed circuit boards or controls, which can be very expensive to service or replace
Smart electronics feature self-diagnostics and self-calibration functions
Sealed and enclosed linear potentiometers feature precision potentiometric output and high-frequency response for precise synchronization and communication of all columns throughout all operation cycles for precise, level lifting
Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle service requirements necessitate specific rise heights
Two-speed lowering option – turtle or rabbit speed settings
Each column is equipped with a warning light and audible alarm for critical warning alerts
Emergency shut-off switches on each column quickly shut off power to the lift in the event an unsafe condition is detected by the operator
Separate key lock enclosure on each column
Electronics are multi-fuse protected
An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-sensitive areas
Pallet-jack style steering wheels enable the columns to be lowered firmly on the floor vs. constantly loaded spring-type steering wheels that can cause columns to roll when unladen by the weight of a vehicle
Low-mounted power units and cylinders means a lower center of gravity, making the columns easier to move and less likely to topple vs. screw-drive systems with heavy overhead motors and drive systems
Extended forks accommodate wide tires and deep wheel configurations
Multi-width wheel forks with locking pins accommodate the widest range of wheels, eliminating the need for specialty wheel adapters
Tandem 8” diameter polyurethane covered steel wheels with sealed roller bearings easily roll over dirt and debris
Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
Manual safety override valves on each column permit the lift to be lowered in the event of a power outage without the need for manual hand cranks
Durable forklift pockets provide simplistic handling when moving the lift columns from one facility to another
Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled lowering in the event of oil pressure loss
Multiple, automatic, independent safety locks spaced every four inches ensure safe operation
Space-saving design, reduced column weight and a tight turning radius provides improved mobility
Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an adjoining bay
Durable powder-coat finish

Product Specifications

Lifting Capacity	18,000 lbs. (8,165 kg)
A - Overall Height (RAISED)	101” (2,565 mm)
B - Overall Height (LOWERED)	146.5” (3,721 mm)
C - Max. Lifting Height	71.5” (1,889 mm)
D - Overall Depth	48.75” (1,238 mm)
E - Overall Width	45” (1,143 mm)
F - Chassis Length	32.25” (819 mm)
G - Min. Lifting Fork Width	9.5” (241 mm)
H - Max. Lifting Fork Width	35” (889 mm)
I - Lifting Fork Length	11.5” (292 mm)
Turning Circle	40” (1,016 mm)
Column Weight	1,450 lbs. (657 kg)
Lifting Speed	85 Seconds
Shipping Weight per Column	1,498-lbs. (679 kg)
Shipping Dimensions per Column	106" x 55" x 41" (2,696 mm x 1,397 mm x 1,041 mm)

Pick Up and Delivery

Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.

Call, text, or chat with us if you have questions.

Downloads

Brochure

Manual

Warranty

We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price (or same price) than us, let us know and we will beat the price hands down. We want you to feel confident that you are getting the absolute best price for the product you are ordering.

Our 100% Price Beat Guarantee has the following restrictions:

Promotions such as rebates and buy one, get one free offers are not eligible
The website can not be a discounter or auction website (ie; eBay, etc)
The competitor must be an Authorized Retailer of the item you have purchased
The Price Beat Guarantee includes will be calculated based on item price, sales tax, shipping charges
Price Beat's Do Not Apply For Exchange Orders, or replacements

Please Note: Some Exclusions May Apply

For any price match inquiries, contact us at support@compactlivingpro.com, We’re here to ensure you get the best deal possible!

Contact Information

Compact Living Pro

Physical Address: 802 Sharview Cir, Charlotte, NC 28217, United States
Phone: +1 (833) 932-9683
Email: support@compactlivingpro.com
Business Hours: Monday to Friday: 9:00 AM to 6:00 PM EST

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Recover password

Create my account

BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4

Customer Reviews

Description

BendPak PCL-18B-4 Mobile Column Lifts - Low Voltage (208-230/190V) - Set of 4

Set of 4 Mobile Column Lifts

Product Features

Product Specifications

Pick Up and Delivery

Downloads

Brochure

Manual

Warranty

Price Beat Guarantee

Contact Information

Payment & Security

Customer Reviews